Model HTG-300GF

---

Rated current 540A

---

Rated power 300kW/375kVA

---

Power factor 0.8

---

Standby power 330kW/412kVA

---

Controller Auto PLC controller

---

Rated voltage 400V/230V

---

Speed Governor Electric control

---

Rated frequency 50Hz

---

Fuel Natural gas

---

Rated speed 1500 rpm

---

Gas Consumption 0.3m³/kW-h

---

Sea-Level < 1000m, Temp <40deg.

---

* Prime Power (PRP): Prime power is available for an unlimited number of annual hours in variable load application, in accordance with GB/T2820-97 (eqv ISO8528); A 10% overload capability is available for a period of 1 hour within a 12-hour period of operation.

---

* Standby Power Rating (ESP): The standby power rating is applicable for supplying emergency power for the duration of a utility power interruption. No overload, utility parallel or negotiated outage operation capability is available at this rating.

---

* Rated Voltage: generally the rated power includes 380/220V, 400/230V, 415/240V, 440/254V, we make it according to client's requirements.

---

Engine Technical Parameters Engine Model Sinotruck/MT13.15-330

---

Rated Power 330kW

---

Engine Type In line,water cool,dry cylinder liner,turbo charged inter cooling,electric control,regulate press gas control,spark plug ignition and lean-burn

---

Cylinder No. 6 in line

---

Bore ×Stroke 126 x 166 mm

---

Displacement 12.419L

---

Start Method Electric

---

Compression rate 11:1

---

Crankshaft Rotation Direction Inverse Hour (From Flywheel)

---

Cooling Method Closed Water Cooling

---

Aspiration Type Turbo charged

---

Speed Governor Electronic

---

Gas Mixer Formation Pre-Mix

---

Rated Fue Consumption (m³/Kw-h) 0.3

---

Average Piston Speed 7.75m/s

---

Lubricating oil Temperature <80deg.

---

Lubricating oil Pressure 345-483 Kpa

---

Max -exhaust Temperature 600 deg.+-25

---

Alternator Technical Parameters

---

Alternator Model Faraday/FD4L

---

Insulation class Class H

---

Rated Power 300kW/375kVA

---

Connection 3-pahse, 4-wire

---

Standby power 330kW/412kVA

---

Cooling Air cooled

---

Power factor 0.8

---

Protection Class IP21

---

Excitation Type Brushless

---

Voltage Regulation Mode AVR (Automatic)

---

L x W x H: 2800x1100x1750 (mm)

---

Gross Weight: 2600 kg

Control Panel
The DSE7310 is an Auto Start Control Module and the DSE7320 is an Auto Mains (Utility) Failure Control Module suitable for a wide variety of single, diesel or gas,gen-set applications. Monitoring an extensive number of engine parameters, the modules will display warnings, shutdown and engine status information on the back-lit LCD screen, illuminated LEDs, remote PC and via SMS text alerts (with external modem). The DSE7320 will also monitor the mains (utility) supply. The modules can be easily configured using the DSE Configuration Suite PC software.Selected front panel editing is also available.

Attachment (Optional Parts)

20ft Container canopy
Scientific and efficient Special sand-proof waterproof blinds with illumination.
Soundproof Canopy
(Super Silent canopy)Containerized Canopy
CHP system (Exhaust Heat Collector)
1. The unique spiral winding structure increases the turbulence effect, and the heat exchange capacity per unit area is 3-7 times that of the traditional heat exchanger.
2. High heat transfer coefficient, high heat exchanger heat transfer efficiency, good heat transfer effect, high heat transfer coefficient up to 14000W/mВ·k, energy saving effect is remarkable.
3. Small size. With only one-tenth of the traditional tube and shell heat exchangers, it takes up less space and reduces infrastructure and installation and maintenance costs.
4. Using a small clearance design to increase the flow rate, the heat exchanger is not easy to foul, and the use and maintenance costs are low.
5. Advanced design concept, the length of the heat exchange tube is 3-4 times the height of the cylinder, the material stays longer and the heat transfer is more fully.
6. Spiral-wound elastic tube bundle design can effectively eliminate pipe vibration and stress due to thermal expansion and contraction deformation.
7. Unique 90 degree connection, heat exchangers all participate in heat exchange, no dead ends and stagnant areas, reduce fluid resistance.
8. Counter-current heat transfer, asymmetric flow design, in the vapor-liquid heat transfer field has other advantages that can not be compared with heat exchangers.
Automatic Paralleling and Gridconnect Control System
This system can connect generator sets in parallel or connect the generator set to the grid automatically.
CHP/Cogeneration/CCHP/Trigeneration
Remote Control
PMG Alternator
Oil and Water Heater
High Voltage Alternator 6.3kv and 10.5kv, High Voltage Electrical Control Cells (PT Cabinet
CT Cabinet
High Voltage outgoing cabinet
DC Panel, Groud Resistance Cabinet and low voltage distribution cabinet etc)